On this episode of The Boiling Point Jude Wolf will discuss the advantages of probe type water level controls over the float type.
He will also share the various ways the probe type water level controls can be mounted externally to boilers and some of the recommendations he suggests to keep your probe type water level control working efficiently.
Do you know the proper length of your probe? You should remove the probe type water level control during your open and close. Use sand paper to clean off any rust build up. Measure the length of your probe and use a sharpie to document the length on the outside of the boiler for the next time you need to replace it.
Need a part? Click here for all of our probe products: https://goo.gl/7vGLxn